Odi Touch
Multi-Parameter Chemical Dosing System
Odi Touch is an automated chemical control system for commercial pools and spas. It monitors free or active chlorine, pH and temperature, can also measure total chlorine, conductivity and more, and offers touchscreen operation and remote monitoring for indoor and outdoor applications.
- 8 inputs for multi-parameter monitoring
- 10 installer-programmable outputs
- Free or active, total and combined chlorine options
- Dosing stops on high or low alarms
Versatile Multi-Parameter Control
Odi Touch brings chlorine, pH and wider water quality monitoring into one touchscreen controller, with programmable outputs to automate plant room tasks and built-in dosing limits for safe operation.
8 Inputs
Multi-parameter monitoring, with additional sensors available for chlorine, pH, temperature, conductivity, turbidity and filter pressure.
10 Programmable Outputs
Installer-programmable outputs across 230VAC, volt-free and digital to automate plant room tasks.
Intuitive Touchscreen
User-friendly interface with adaptable configurations for various pool volumes and actions.
Safe Dosing Limits
Dosing stops on high or low alarms, with a programmable maximum daily dosing time.
PID Regulation
Multiple regulation types: PID (cycle or pulse), on/off, threshold and hysteresis.
Continuous Self-Diagnosis
Continuous self-diagnosis for optimal efficiency, compatible with all chlorine types.
What Odi Touch Can Measure
Every model includes pH and temperature sensors. With 8 inputs and additional sensors available, Odi Touch can monitor:
Standard sensors vary by model. See the model table below.
10 Programmable Outputs
- Liquid chlorine backup for salt chlorination
- Auto CO2 / acid changeover
- Temperature control
- Outputs across 230VAC, volt-free and digital
Models
Odi Touch is available in six models. Choose by sensor type, the cyanuric acid level of your pool and whether it uses salt chlorination. All models are complete with pH and chlorine output.
| Model | Sensors | Pool type and cyanuric acid | Sanitiser and salt chlorination |
|---|---|---|---|
| ODIA | Active chlorine, pH and temperature | Indoor pools or spas Cyanuric acid 0 ppm or less than 2 ppm | Bromine, chlorine (all types) or salt chlorination. Compatible with by-products of electrolysis (salt chlorination). |
| ODIAT | Active chlorine, total chlorine, pH and temperature | Indoor pools or spas Cyanuric acid 0 ppm or less than 2 ppm | Bromine or chlorine (all types). |
| ODIATS | Active chlorine, total chlorine, pH and temperature | Indoor pools or spas Cyanuric acid 0 ppm or less than 2 ppm | Bromine, chlorine (all types) or salt chlorination. Compatible with by-products of electrolysis (salt chlorination). |
| ODIF | Free chlorine, pH and temperature | Outdoor pools or spas Cyanuric acid 20 to 40 ppm | Compatible with by-products of electrolysis (salt chlorination). |
| ODIFT | Free chlorine, total chlorine, pH and temperature | Outdoor pools or spas Cyanuric acid 20 to 40 ppm | Not suitable for by-products of electrolysis (salt chlorination). |
| ODIFTS | Free chlorine, total chlorine, pH and temperature | Outdoor pools or spas Cyanuric acid 20 to 40 ppm | Compatible with by-products of electrolysis (salt chlorination). |
Compatible with most swimming pool systems. Integration support is available via Waterlink’s technical team.
Backed by Waterlink’s standard commercial warranty. See full terms at waterlink.com/warranty.
Applications
Odi Touch suits a wide range of commercial aquatic facilities, indoor and outdoor, that require reliable chemical dosing control.
Frequently Asked Questions
Which Odi Touch model should I choose?
Start with cyanuric acid. Active chlorine models (ODIA, ODIAT and ODIATS) are for indoor pools or spas where cyanuric acid is 0 ppm or less than 2 ppm. Free chlorine models (ODIF, ODIFT and ODIFTS) are for outdoor pools or spas where cyanuric acid is 20 to 40 ppm. Models with a T add a total chlorine sensor. All models include pH and temperature sensors and are complete with pH and chlorine output.
Which Odi Touch models suit salt chlorinated pools?
ODIA, ODIATS, ODIF and ODIFTS are compatible with by-products of electrolysis (salt chlorination). ODIFT is not suitable for by-products of electrolysis, and ODIAT is listed for bromine or chlorine (all types).
What can Odi Touch measure?
Odi Touch has 8 inputs, with additional sensors available to monitor free, active, total and combined chlorine, pH, temperature, conductivity, turbidity and filter pressure.
What can the programmable outputs do?
Odi Touch has 10 installer-programmable outputs across 230VAC, volt-free and digital. They can automate tasks such as liquid chlorine backup for salt chlorination, auto CO2 or acid changeover and temperature control.
How is Odi Touch different from Tere’O Touch?
Tere’O Touch controls free or active chlorine and pH, with one FAC output and one pH output. Odi Touch adds up to 8 inputs and 10 programmable outputs, with options to measure total and combined chlorine, conductivity, turbidity and filter pressure.
What happens if a reading goes out of range?
Dosing stops on high or low alarms, and a programmable maximum daily dosing time limits how long the system can dose. The controller also runs continuous self-diagnosis.
Which regulation types are available?
Odi Touch supports PID (cycle or pulse), on/off, threshold and hysteresis regulation.
Can Odi Touch be monitored remotely?
Yes. Remote monitoring is available. Contact our team to discuss the right setup for your facility.
Still have questions about Odi Touch?
Contact UsLooking for More Solutions?
Hydro Touch
pH with ORP or free chlorine control and onboard dosing pumps, for light commercial pools and spas up to 160,000 L.
View ProductTere’O Touch
Free or active chlorine and pH control with PID regulation and remote monitoring options.
View ProductEnvirogen
Onsite chlorine generator and dosing controller in one unit, for salt or magnesium pools.
View ProductEnvirogen LTS
Modular onsite chlorine generation that adds capacity as bather loads grow, up to 6 linked units.
View ProductReady to automate your chemical control?
Request a quote online or call the Waterlink team to configure Odi Touch for your facility.
Need help deciding?
Request a Quote
Every facility is unique. Complete this form and our team will specify the most suitable solution for your requirements and provide a tailored quote.