Envirogen
Salt or Magnesium Onsite Chlorine Generator
Envirogen combines a chlorine generator and chemical dosing system in one streamlined unit, saving installation time and reducing capital investment. It simplifies water management, improves compliance and enhances indoor comfort by improving water and air quality.
- Chlorine generator and dosing system in one unit
- Control modules from 50 to 750 g/hr
- Master or slave configuration up to 3.5 kg/hr
- Works with salt or magnesium
Onsite Chlorine Generation and Control in One
Designed for flexibility and ease of maintenance, Envirogen pairs chlorine generation with an advanced control system, so one unit handles sanitiser production, pH control and plant room automation.
Generator and Dosing in One
Choose chlorine only control, pH control or both, from a single streamlined unit.
Salt or Magnesium
Works with magnesium salt or salt, in standard salinity and low salinity models.
Scalable Output
Control modules from 50 to 750 g/hr, with master or slave configuration for up to 3.5 kg/hr.
Stable Free Chlorine
Multiple set points, timer configurations and programmable sensor inputs avoid over or under-shoot.
Programmable Automation
4 programmable GPOs and 4 relays handle tasks like CO2 dosing and heating control, sensor or timer based.
Protection and Diagnostics
Flow and thermal protection, built-in safety systems, and alarm and fault reporting when connected to the internet.
Models & Specifications
Envirogen is available in standard salinity and low salinity models. All models run on 220 to 240 Volts (AC).
Standard Salinity (3000 ppm)
| Feature | E75 g/hr | E125 g/hr | E175 g/hr | E250 g/hr | E500 g/hr | E750 g/hr |
|---|---|---|---|---|---|---|
| Input voltageVolts (AC) | 220 to 240 | 220 to 240 | 220 to 240 | 220 to 240 | 220 to 240 | 220 to 240 |
| Power consumptionWatts | 1000 | 1250 | 1500 | 2000 | 4000 | 5000 |
| Power protection | 10A RCBO | 10A RCBO | 10A RCBO | 10A RCBO | 20A RCBO | 32A RCBO |
| Output voltage | 5 to 16 VDC | 5 to 16 VDC | 5 to 16 VDC | 5 to 16 VDC | 5 to 24 VDC | 5 to 24 VDC |
| Output ampsAmps | 18 | 25 | 32 | 80 | 150 | 200 |
| Operating temperature°C | -5 to 50 | -5 to 50 | -5 to 50 | -5 to 50 | -5 to 50 | -5 to 50 |
| Cooling | Fan forced | Fan forced | Fan forced | Heatsink | Fan forced | Fan forced |
| Enclosure material | Powder coated aluminium | Powder coated aluminium | Powder coated aluminium | Powder coated aluminium | Powder coated aluminium | Powder coated aluminium |
| Enclosure dimensionsW x H (mm) | 420 x 380 | 420 x 380 | 420 x 380 | 670 x 420 | 800 x 800 | 800 x 800 |
| Weightkg | 12 | 14 | 14 | 15 | 40 | 50 |
| TDS rangeppm | 3000 to 3500 | 3000 to 3500 | 3000 to 3500 | 3000 to 3500 | 3000 to 3500 | 3000 to 3500 |
| Water flow protection | Cell and sample flow switch | Cell and sample flow switch | Cell and sample flow switch | Cell and sample flow switch | Cell and sample flow switch | Cell and sample flow switch |
Low Salinity (1500 ppm)
| Feature | E50 g/hr | E100 g/hr | E200 g/hr | E400 g/hr |
|---|---|---|---|---|
| Input voltageVolts (AC) | 220 to 240 | 220 to 240 | 220 to 240 | 220 to 240 |
| Power consumptionWatts | 1000 | 1250 | 2000 | 4000 |
| Power protection | 10A RCBO | 10A RCBO | 10A RCBO | 10A RCBO |
| Output voltage | 5 to 16 VDC | 5 to 16 VDC | 5 to 16 VDC | 5 to 16 VDC |
| Output ampsAmps | 12 | 20 | 60 | 120 |
| Max output currentAmps | 25 | 40 | 100 | 200 |
| Operating temperature°C | -5 to 50 | -5 to 50 | -5 to 50 | -5 to 50 |
| Cooling | Heatsink | Heatsink | Heatsink | Fan forced |
| Enclosure material | Powder coated aluminium | Powder coated aluminium | Powder coated aluminium | Powder coated aluminium |
| Enclosure dimensionsW x H (mm) | 420 x 380 | 420 x 380 | 670 x 420 | 800 x 800 |
| Weightkg | 12 | 15 | 15 | 40 |
| Conductivity rangemS/cm | 3 to 4 | 3 to 4 | 3 to 4 | 3 to 4 |
| TDS rangeppm | 1500 to 2000 | 1500 to 2000 | 1500 to 2000 | 1500 to 2000 |
| Water flow protection | Cell and sample flow switch | Cell and sample flow switch | Cell and sample flow switch | Cell and sample flow switch |
Upgrade Options
- Temperature sensor
- Conductivity sensor
- Total chlorine sensor
- Remote monitoring
Compatible with nearly all commercial aquatic applications. Due to system intricacies, design and integration support is available via Waterlink’s technical team.
Backed by Waterlink’s standard commercial warranty. See full terms at waterlink.com/warranty.
Applications
Envirogen is designed for commercial aquatic environments of all sizes.
Frequently Asked Questions
Can Envirogen run on magnesium?
Yes. Envirogen works with salt or magnesium and is compatible with magnesium salt.
What is the difference between standard and low salinity models?
Standard salinity models (E75 to E750) are designed for 3000 ppm salinity, with a TDS range of 3000 to 3500 ppm. Low salinity models (E50 to E400) are designed for 1500 ppm, with a TDS range of 1500 to 2000 ppm and a conductivity range of 3 to 4 mS/cm.
How much chlorine can Envirogen produce?
Control modules range from 50 to 750 g/hr. Units can be configured as master or slave for a production capacity of up to 3.5 kg/hr.
Can Envirogen provide a liquid chlorine backup?
Yes. Envirogen supports automatic liquid chlorine backup and automatic pH control, subject to dosing pump installation.
What can the programmable outputs automate?
Envirogen has 4 programmable GPOs and 4 relays to handle tasks like CO2 dosing and heating control. Automation can be sensor based or timer based.
Can Envirogen report alarms remotely?
Yes. When connected to the internet, Envirogen can diagnose and report any alarms or faults. Remote monitoring is also available as an upgrade.
What protection is built in?
Envirogen includes flow and thermal protection, with a cell and sample flow switch on every model. Each module has electronic and mechanical safety systems that allow for expansion and redundancy.
How is Envirogen different from Envirogen LTS?
Envirogen is available in set capacity from 50 to 750 g/hr and links up to 3.5 kg/hr. Envirogen LTS is modular and expandable, with 300 to 650 g/hr modules that link up to 6 units for nearly 4 kg/hr, suited to facilities planning staged upgrades.
Still have questions about Envirogen?
Contact UsLooking for More Solutions?
Envirogen LTS
Modular onsite chlorine generation that adds capacity as bather loads grow, up to 6 linked units.
View ProductHydro Touch
pH with ORP or free chlorine control and onboard dosing pumps, for light commercial pools and spas up to 160,000 L.
View ProductTere’O Touch
Free or active chlorine and pH control with PID regulation, plus remote monitoring and temperature sensor options.
View ProductOdi Touch
Up to 8 parameters, including free/active, total and combined chlorine, conductivity and turbidity.
View ProductReady to generate chlorine onsite?
Request a quote online or call the Waterlink team to discuss your facility needs.
Need help deciding?
Request a Quote
Every facility is unique. Complete this form and our team will specify the most suitable solution for your requirements and provide a tailored quote.